How to install RTC library in Arduino Library manager First you have add the library in to Arduino IDE as shown in the figure 5 below. Go the “Sketch” menu…
GETTING STARTED WITH ARDUINO PROGRAMMING PART 6
PAGE 6 Using Interrupts: Interrupts are useful for making things happen automatically in microcontroller programs, and can help solve timing problems. Good tasks for using an interrupt may include reading…
GETTING STARTED WITH ARDUINO PROGRAMMING PART 5
PAGE 5 Serial.println: Prints data to the serial port as human-readable ASCII text followed by a carriage return character (ASCII 13, or '\r') and a newline character (ASCII 10, or…
GETTING STARTED WITH ARDUINO PROGRAMMING PART 4
PAGE 4 Serial.available: Get the number of bytes (characters) available for reading from the serial port. This is data that's already arrived and stored in the serial receive buffer (which…
GETTING STARTED WITH ARDUINO PROGRAMMING PART 3
PAGE 3 Syntax: delayMicroseconds(us) Parameters: us: the number of microseconds to pause (unsigned int) Returns: None UART COMMUNICATION: This the traditional communication protocol which uses the inbuilt UART (Universal Asynchronous…
GETTING STARTED WITH ARDUINO PROGRAMMING PART 2
PAGE 2 Warning: Don't use anything less than 0V or more than 5V for external reference voltage on the AREF pin! If you're using an external reference on the AREF…
ARDUINO ESPLORA
ARDUINO ESPLORA
ARDUINO YUN
ARDUINO YUN
ARDUINO ETHERNET
ARDUINO ETHERNET
ARDUINO BLUETOOTH
ARDUINO BLUETOOTH